【Application】：
High-frequency spark machine is a fast and continuous withstand voltage test method is mainly used for rubber and plastic insulated wire, or to have the rubber sheath, plastic insulated wire core wire and cable products withstand voltage test, generally applicable at 1000V and below voltage level products. As the device is simple, fast, at the factory has been widely adopted.
【Technique Feature】：
1.After the detection of the electrical conductor can quickly restore the fault detection state (about 0.1 seconds).
2.Electrode head size than conventional (50Hz) reduced by about 50 times.
3.Test output high voltage can be 0.0 ~ 15.0K VR.MS (RMS) freely adjusted.
4.Sparks instantly generate a good conductor wires will not damage the insulation.
5.Limiting the fault current, so it does not damage the test device.
6.Quick fault detection pinhole and wire conductor Popi.
7.A safety switch interlock protection device.
【Technique Specifications】：

Item	High-frequency spark machine	Frequency sparks
Volume	Small size, frequency machine only 1/5	Bulky, inconvenient to install and transport
Maximum public consumption	150VA	1500VA
Detection line speed (UL standards)	Up to 1000 m / min or more	Up to 350 m / min
Input Power	AC100V/120V/200V/220V/ 240V，50/60Hz	Use only AC220V 50Hz Power
Process	Detection rate is high, the water can be assembled in a high-speed extrusion line test	Detecting a low speed, high speed can not be fitted in the flow line
Breakdown recovery rate	0.04 seconds	About 0.1 seconds
Security situation	There are occasional tingling shock, without danger to life (the 3k-10kHz range)	Occasionally life-threatening electric shock