The active release high-speed forming unit GS630/1250 is suitable for wire looping and tying. The production machine of the ring forming machine has high production efficiency and good quality of the cable, which solves the problem of small cross section in the industry, large coils with wires and poor quality of the cable.

Characteristics

The active release high-speed forming unit GS630/1250 has the following features:

1. The loading and unloading reels adopt electric lifting, and the active release self-locking brakes are not chaotic.

2. The storage line two-way adjustment device is used to control the high and low speed of the discharge line.

3, the automatic cable is equipped with special equipment, and the coiling speed is fast.

4. After the wire is looped, it can be quickly bundled and easily removed, with high efficiency and short use time.

5, the three steps of wire looping, tying, packaging, etc. can be completed by one person.

6, the cable is neat and beautiful.

Technical Parameters

Active Discharge High Speed ​​Looping Unit GS630/1250 Technical Parameters

Xianglong into a circle machine

1, the outer diameter of the coil: Φ310mm

2, the core of the coil: Φ120mm

3, the width of the coil: 30-100mm (adjustable)

4, the loop diameter: Φ2.8 ~ 8mm square

5, the receiving shaft speed: 0-500r / min (frequency control)

6, motor power: 2.2 kw (inverter 2.2PH)

7. Wire reel specifications: PN1000, PN1250 (made according to the inner hole of the user's reel)

8, automatic cable line square: 1.5, 2.5, 4, 6, 10 (aluminum plastic, copper plastic wire single core wire diameter)

9. Lifting disc lifting form: lever type (motor 1.5kw-4 level)

10, the release plate installation form: with shaft

11, the release line speed power: 3kw-4 level (distribution disk frequency conversion control speed)

12, storage line form: buffer sliding storage line

13, meter meter device: digital display electronic meter

14, meter-in-place stop device: frequency conversion linkage control

Looping unit configuration

The forming unit consists of a storage line type automatic tension control pay-off frame, a metering device and a high-speed wire looping mainframe.

Function of each component of the forming unit

1. The line-forming part of the coiling unit--the storage line type automatic tension control line-up frame

The storage line type automatic tension control pay-off frame adopts a lever type upper plate device, which can quickly change the wire reel. The line speed is fully synchronized with the host.

2, the metering part of the coiling unit - metering device

The meter wheel uses a half-meter wheel device. The pressure roller adopts a rubberizing wheel, and the meter wheel and the pressure roller adopt a one-way bearing, and the wire can only go forward without being retracted.

3, into the ring unit host

1) Adopting the force-sliding type cable arranging device, the winding speed of the cable layer is fast.

2) The tension of the cable is dependent on the self-tension of the wire, which can ensure that the pitch of the cable is not affected by the size of the wire, so that the wires are arranged in parallel to form a layer winding winding.

3) The winding head adopts an automatic expansion and contraction device.

Dongguan Pinyang Cable Machinery Co., Ltd. is a professional manufacturer of wire and cable equipment for professional development, design and production. It specializes in: optical fiber extruder, ultra-fine winding machine, earphone wire special machinery and other products, optical fiber extruder, very fine winding Machine, earphone line dedicated mechanical consultation hotline: 13731224526 / Lu Jianjun